Xytu® DF2410

Modified Polyether Defoamer for Microfoam Control

DF2410 is a modified polyether defoamer designed to help control microfoam in coating formulations, including spray-applied films.

Product inquiry Downloads

Xytu® DF2410 Modified Polyether Defoamer for Microfoam Control

Description

DF2410 combines defoaming with a wetting effect. It provides good foam suppression and foam breaking in low-PVC systems, controlling microfoam in films applied by airless or air spraying while maintaining film appearance and gloss. It can be used in inorganic coatings, water-based wood coatings and water-based industrial coatings.

Directions for Use

Recommended addition level: 0.1%–0.5% by weight of the total coating formulation.

Add directly to paint as supplied. Split the intended total defoamer addition into two portions: 50% during grinding and the remaining 50% during let-down, before adding the emulsion. Stir or shake thoroughly before use.

Packaging and Storage

Packed in 25 kg/180 kg plastic drums. Shelf life is 12 months from production when stored in unopened original containers at -5°C to +40°C.

Technical Documents and Application

Download the English TDS from the Technical Documents section below. See water-based coating formulation and application for related material selection.

For the current Safety Data Sheet (SDS), request DF2410 safety information. Specify the required language and destination country.